產品特點

1.操作簡單Easy to operate

基于WINDOWS系統編程軟件，界面簡潔，操作簡單，功能完善；圓形化制作加工數據，所見即所得，減少切割程序編輯時間；

WYSIWYG display since drawing processing data application,to reduce cutting edited time.

2.精湛的視覺自動定位Super Visual positioning

專用光源的，配合高像素?cái)?shù)字彩色CCD放大鏡頭，輔助程序示教編輯功能，成像高清穩定.

Special light source,equipped with high pixel CCD enlarging lens,teaching,creating and editing functions,and the image is stability and clear

自動找MARK點視覺功能，結構精密，分析精度更高

By automatically visual MARK point finding function precise structure,to have higher for the PCB milling

3.切割系統Cutter system

采用高速主軸切割PCB板。切割應力小、精度高、低噪音；適應任何切割形狀和電路板，如：整圓、直線、L型、U型、方型、弧形。

The milling cutter is driven by a high speed spindle with the advantage of areduced cutting force,high accuracy low noise and is suitable for all cutting formats such as cricles ,straight line,Lor U type,squares and arc shapes.

4.雙工作臺可編不同產品進行切割，幫助企業有效降低設備閑置時間，最大限度地提高生產效率。

Two slide workbable can support different cutting shape,reducing changeover idle capacity and maximizing productivity.

5.雙工作臺進出皆采用松下伺服馬達+絲桿+道軌，精度更高、速度更快、分板應力小、穩定性耐用性更佳。

Double entry and exit of the working table is made of Panasonic servo motor +screw+guide rail, with higher accuracy, faster speed, less stress and better durability.

6.安全光幕：符合國際安全標準，為員工提供一個安全工作的環境。

Safety:comply with international safety standards ,to provide a safe working environment for employees.

7.最大有效切割行程X350*Y400（上吸塵），未來產品擴容性大

The moste effective cutting line and X350*Y400(on the dust), the future expansion of large products.

8.可單獨上或下集塵，也可同時上下集塵，更加靈活，標配上吸塵，吸塵口隨銑刀同時運行，吸取局部小范圍，吸塵效果比下吸塵提升80%

Can be alone or the dust collection ,but also at the same time the dust collection ,more flexible, standard on the vacuum cleaner, dust suction mouth with the milling cutter at the same time run, absorb a small area, the dust absorption rate than the vacuum cleaner 80%.

9.標配MES或ERP連接端口，實時連接中央數據庫，實現設備信息化管理無縫對接，開放以太納接口，并支持TCP/IP網絡通信協議，及必要的相關軟件、程序。

Standard MES or ERP connection port, real-time connection to the central database, realize the equipment and seamless docking, open Ethernet interface, and support the TCP/IP network communication protocol, and related software, the necessary procedures.

10.標配條碼掃描，可實現分板后即時上傳單板條碼信息。

Standard bar code scanning, can be achieved after the board immediately upload single board barcode information.

11.飛行相機結構，當左右平臺的產品高度不一致時，可實現自動對焦識別Mark點。

Flying camera structure, when products are highly inconsistent about platform, which can realize automatic focus recognition Mark points.